View ASMT-MY60-NCEA0_3750603.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

asmt-mx6x & asmt-mxhx moonstone tm ?w power led light source data sheet description ?w power led light source is a high performance energy ecient device which can handle high thermal and high driving current. the exposed pad design has excellent heat transfer from the package to the motherboard. op- tion with electrically isolated metal slug is also available the cool white power led is available in various color temperature ranging from 4000k to 10000k and warm white power led ranging from 2600k to 4000k. the low prole package design is suitable for a wide vari- ety of applications especially where height is a constraint. the package is compatible with reow soldering. this will give more freedom and exibility to the light source de- signer. applications sign backlight safety, exit and emergency sign lightings specialty lighting such as task lighting and reading lights retail display commercial lighting accent or marker lightings, strip or step lightings features available in cool white and warm white color available in diuse and non-diuse version available in both electrical isolated and non-isolated metal slug energy ecient exposed pad for excellent heat transfer suitable for reow soldering process high current operation long operation life wide viewing angle silicone encapsulation esd hbm class 3b, > 8000 msl 4 products high junction temperature of 145c specications ingan technology 3.5v, 150ma (typical) 110 viewing angle
2 package dimensions notes: 1. all dimensions are in millimeters. 2. unless otherwise stated, the tolerance for dimension is 0.1mm. 3. metal slug is connected to anode for electrically non-isolated option. metal slug cathode anode 1 2 3 10.00 8.50 3 1 2 8.50 ? 5.26 ? 8.00 5.08 0.81 2.00 5.25 1.30 10.60 1.27 3.30 heat sink led zener + ? device selection guide (tj = 25c) part number color luminous flux, v [1,2] (lm) test current (ma) dice technology electrically isolated metal slug min. typ. max. asmt-mw60 cool white 19.5 30.0 43.0 150 ingan no asmt-mw62 yes asmt-my60 warm white 15.0 25.0 33.0 150 ingan no asmt-my62 yes asmt-mwh0 cool white diused 15.0 25.0 43.0 150 ingan no asmt-mwh2 yes asmt-myh0 warm white diused 11.5 20.0 33.0 150 ingan no asmt-myh2 yes notes: 1. v is the total luminous ux output as measured with an integrating sphere at 25ms mono pulse condition. 2. flux tolerance is 10 %
3 part numbering system absolute maximum ratings at t a = 25c parameter asmt-mx6x / asmt-mxhx units dc forward current [1] 150 ma peak pulsing current [2] 300 ma power dissipation 525 mw led junction temperature 145 c operating ambient tempera ture range -40 to +120 c storage temperature range -40 to +120 c notes: 1. dc forward current C derate linearly based on figure 5. 2. pulse condition duty factor = 10%, frequency = 1khz optical characteristics (t a = 25c) part number color correlated color temperature, cct (kelvin) viewing angle 2? [1] (degrees) luminous eciency (lm/w) min max typ typ asmt-mw6x cool white 4000 10000 110 57 asmt-my6x warm white 2600 4000 110 48 asmt-mwhx cool white diused 4000 10000 120 48 asmt-myhx warm white diused 2600 4000 120 38 notes: 1. ? is the o-axis angle where the luminous intensity is ? the peak intensity. electrical characteristic (t a = 25c) dice type forward voltage v f (volts) @ i f = 150ma reverse voltage v r (volts) thermal resistance r j-ms ( c/w) [1] typ. max. max. typ. ingan 3.5 4.0 5 27 note: 1. r j-ms is thermal resistance from led junction to metal slug. asm t C m x x x C n x 1 x 2 x 3 x 4 packaging op t ion 0 C t ube 1 C t ape and ree l co l or b in se l ec t ion maximum fl ux b in minimum fl ux b in h ea t sink 0 C e l e c tri c a ll y non-iso l ated 2 C e l e c tri c a ll y iso l ated si l icone t ype 6 C non-diffused h C diffused co l or w C coo l white y C warm white
4 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 380 430 480 530 580 630 680 730 780 wavelength - nm relative intensity cool white diffused warm white diffused cool white warm white 0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.30 0 20 40 60 80 100 120 140 160 180 200 mono pulse current - ma relative luminous flux (v) - lm 0 25 50 75 100 125 150 175 200 0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 forward voltage - v forward current - ma 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 -90 -70 -50 -30 -10 10 30 50 70 90 off-axis angle() relative intensity cool white diffused warm white diffused cool white warm white figure 1. relative intensity vs. wavelength figure 2. forward current vs forward voltage figure 3. relative luminous flux vs. mono pulse current figure 4 . radiation pattern 0 30 60 90 120 150 0102030405060708090 t a ambient temperature - c i f max forward current - ma r ja = 120c/w r ja = 100c/w r ja = 140c/w 180 figure 5. maximum forward current vs. ambient temperature. derated based on t j max = 1 4 5c, r ja = 100c/w, 120c/w and 1 4 0c/w
5 10.70 0.10 17.00 0.20 1.00 0.10 5.08 0.10 3.1 0.10 8.40 0.10 figure 7. recommended soldering land pattern figure 8. temperature vs. relative forward voltage shift figure 9. relative lop vs junction temperature for ingan devices flux b in limit [1] (for reference only) [x 1 x 2 ] b in flux (lm) at 150ma min max a 5.5 7.0 b 7.0 9.0 c 9.0 11.5 d 11.5 15.0 e 15.0 19.5 f 19.5 25.5 g 25.5 33.0 h 33.0 43.0 tolerance for each bin limits is 10 % figure 6. recommended reow soldering 217 c 200 c 60 - 120 sec. -6c/sec. max. 3 c/sec. max. 3 c/sec. max. 150 c 255 - 260 c 100 sec. max. 10 to 30 sec. time temperature (acc. to j-std-020c) 0 10 20 30 40 50 60 70 80 90 100 25 35 45 55 65 75 85 95 105 115 125 135 145 junction temperature (c) relative lop (%) ?w cool white ?w warm white -300 -250 -200 -150 -100 -50 0 50 100 150 200 250 300 350 -40 -15 10 35 60 85 temperature - c relative forward voltage shift (mv)
6 color bin selection [x 3 ] individual reel or tube will contain leds from one color bin only. cool white selection b in 0 full distribution a a only b b only c c only d d only e e only f f only g g only h h only l a and g only m b and h only n a and c only p b and d only q e and c only r f and d only s g and h only u e and f only w c and d only z a and b only 1 a, b, c and d only 2 g, h, a and b only 4 c, d, e and f only warm white selection b in 0 full distribution a a only b b only c c only d d only e e only f f only n a and c only p b and d only q e and c only r f and d only u e and f only w c and d only z a and b only 1 a, b, c and d only 4 c, d, e and f only
7 primary color b inning cool white color limits (chr omaticity coordinates) bin a x y 0.367 0.400 0.362 0.372 0.329 0.345 0.329 0.369 bin b x y 0.362 0.372 0.356 0.330 0.329 0.302 0.329 0.302 bin c x y 0.329 0.369 0.329 0.345 0.305 0.322 0.301 0.342 bin d x y 0.329 0.345 0.329 0.302 0.311 0.285 0.305 0.322 bin e x y 0.303 0.333 0.307 0.311 0.283 0.284 0.274 0.301 bin f x y 0.307 0.311 0.311 0.285 0.290 0.265 0.283 0.284 bin g x y 0.388 0.417 0.379 0.383 0.362 0.372 0.367 0.400 bin h x y 0.379 0.383 0.369 0.343 0.356 0.330 0.362 0.372 tolerances 0.01 warm white color limits (chromaticity coordinates) bin a x y 0.452 0.434 0.488 0.447 0.470 0.414 0.438 0.403 bin b x y 0.438 0.403 0.470 0.414 0.452 0.384 0.424 0.376 bin c x y 0.407 0.393 0.418 0.422 0.452 0.434 0.438 0.403 bin d x y 0.395 0.362 0.407 0.393 0.438 0.403 0.424 0.376 bin e x y 0.381 0.377 0.387 0.404 0.418 0.422 0.407 0.393 bin f x y 0.373 0.349 0.381 0.377 0.407 0.393 0.395 0.362 tolerances 0.01 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 x - coordinate y - coordinate c e d a f 4.5k 7k 10k 4.0k g h 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 0.52 x - coordinate y - coordinate c e d a f 3.5k 4.0k 2.6k black body curve black body curve 5.6k b b 3.0k figure 10. color bins (cool white) figure 11. color bins (warm white)
8 sub-color b inning (only applicable for color bin a to bin d and bin g to bin h) color limits cool white color limits (chr omaticity coordinates) bin a1 x y 0.364 0.383 0.367 0.400 0.348 0.385 0.347 0.372 bin a2 x y 0.364 0.383 0.362 0.372 0.346 0.359 0.347 0.372 bin a3 x y 0.329 0.357 0.329 0.369 0.348 0.385 0.347 0.372 bin a4 x y 0.329 0.345 0.329 0.357 0.347 0.372 0.346 0.359 bin b1 x y 0.362 0.372 0.360 0.357 0.344 0.344 0.346 0.359 bin b2 x y 0.360 0.357 0.358 0.343 0.343 0.331 0.344 0.344 bin b3 x y 0.358 0.343 0.356 0.330 0.341 0.314 0.343 0.331 bin b4 x y 0.329 0.331 0.329 0.345 0.346 0.359 0.344 0.344 bin b5 x y 0.329 0.331 0.344 0.344 0.343 0.331 0.329 0.320 bin b6 x y 0.343 0.331 0.341 0.314 0.329 0.302 0.329 0.320 bin c1 x y 0.329 0.369 0.329 0.357 0.315 0.344 0.314 0.355 bin c2 x y 0.329 0.357 0.329 0.345 0.316 0.333 0.315 0.344 bin c3 x y 0.314 0.355 0.315 0.344 0.303 0.333 0.301 0.342 bin c4 x y 0.315 0.344 0.316 0.333 0.305 0.322 0.303 0.333 tolerances 0.01 cool white color limits (chr omaticity coordinates) bin d1 x y 0.329 0.345 0.329 0.331 0.317 0.320 0.316 0.333 bin d2 x y 0.329 0.331 0.329 0.320 0.318 0.310 0.317 0.320 bin d3 x y 0.329 0.320 0.329 0.302 0.320 0.293 0.318 0.310 bin d4 x y 0.316 0.333 0.317 0.320 0.307 0.311 0.305 0.322 bin d5 x y 0.317 0.320 0.318 0.310 0.309 0.300 0.307 0.311 bin d6 x y 0.318 0.310 0.320 0.293 0.311 0.285 0.309 0.300 bin g1 x y 0.392 0.421 0.386 0.400 0.364 0.383 0.367 0.400 bin g2 x y 0.386 0.400 0.382 0.385 0.362 0.372 0.364 0.383 bin h1 x y 0.382 0.385 0.378 0.370 0.360 0.357 0.362 0.372 bin h2 x y 0.378 0.370 0.375 0.358 0.358 0.343 0.360 0.357 bin h3 x y 0.375 0.358 0.371 0.344 0.356 0.330 0.358 0.343 figure 12. sub-color bins (cool white) 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 x - coordinate y - coordinate 4.5k 5.6k 7k 10k 4.0k a1 a2 a3 a4 b1 b2 b3 b4 b5 b6 c1 c2 c3 c4 d1 d2 d3 d4 d5 d6 g1 g2 h1 h2 h3 black body curve
9 package tube C option 0 tape & reel C option 1 dim value ao 8.800.10 bo 16.450.10 ko 3.600.10 w 24.00.10 p 16.00.10 qty/reel 250ea unit: mm 535.00 1 .00 5.45 5.80 4.65 5.50 1 0. 1 0 37.00 8.30 f ron t v i ew t op v i ew a a b ao b p sec ti on b sec ti on a k o w f e bo 2.5 figure 13. tube dimensions figure 1 4 . carrier tape dimensions
10 end minimum of 160 mm of empty component poc k ets sealed with cover tape. mounted with components minimum of 390 mm of empty component poc k ets sealed with cover tape. start *note: tape & reel packaging only applicable as per this datasheet only. figure 15. carrier tape leader and trailer dimensions reel dimension r10.00 60.0o 268.00 330.00 1.00 99.50 1.00 2.30 2.30 24.0 +1.00 ?0.00 13.50 0.50 2.50 0.50 r10.50 0.50 120.0o figure 16. reel dimensions
disclaimer: avagos products and software are not specifically designed, manufactured or autho- rized for sale as parts, components or assemblies for the planning, construction, maintenance or direct operation of a nuclear facility or for use in medical devices or applications. customer is solely responsible, and waives all rights to make claims against avago or its suppliers, for all loss, damage, expense or liability in connection with such use. for product information and a complete list of distributors, please go to our web site: www.avagotech.com avago, avago technologies, and the a logo are trademarks of avago technologies in the united states and other countries. data subject to change. copyright ? 2005-2010 avago technologies. all rights reserved. av02-1319en - september 28, 2010 handling precaution the encapsulation material of the product is made of sili- cone for better reliability of the product. as silicone is a soft material, please do not press on the silicone or poke a sharp object onto the silicone. these might damage the product and cause premature failure. during assembly or handling, the unit should be held on the body only. please refer to avago application note an 5288 for detail infor- mation. moisture sensitivity this product is qualied as moisture sensitive level 4 per jedec j-std-020. precautions when handling this moisture sensitive product is important to ensure the reliability of the product. do refer to avago application note an5305 handling of moisture sensitive surface mount devices for details. a. storage before use C unopen moisture barrier bag (mbb) can be stored at <40c/90%rh for 12 months. if the actual shelf life has exceeded 12 months and the humidity indicator card (hic) indicates that baking is not required, then it is safe to reow the leds per the original msl rating. C it is not recommended to open the mbb prior to assembly (e.g. for iqc). b. control after opening the mbb C the humidity indicator card (hic) shall be read immediately upon opening of mbb. C the leds must be kept at <30c/60%rh at all time and all high temperature related process including soldering, curing or rework need to be completed within 72 hours. c. control for unnished reel C for any unused leds, they need to be stored in sealed mbb with desiccant or desiccator at <5%rh. d. control of assembly boards C if the pcb soldered with the leds is to be subjected to other high temperature processes, the pcb need to be stored in sealed mbb with desiccant or desiccator at <5%rh to ensure no leds have exceeded their oor life of 72 hours. e. baking is required if C hic 10% indicator is not blue and 5% indicator is pink. C the leds are exposed to condition of >30c/60% rh at any time. C the leds oor life exceeded 72hrs. recommended baking condition: 605c for 20hrs.

▲Up To Search▲

Price & Availability of ASMT-MY60-NCEA0

	To Download ASMT-MY60-NCEA0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .